ecomax 30

For rooms with volume up to 10,000 cubic meters

With a filtration performance of 3,500 m³/h, the ecomax 30 is able to clean large production and industrial halls to clean room quality.

The ecomax 30 features a powerful pre-filter and a main filter ISO ePM1 65% (F8) as standard. One unit has the capacity to operate in very dirty halls up to 500m² and 7m high. This corresponds to an air exchange rate of 1:1 per hour ( 3,500m³/h).

Optional can be equipped with 5 different main filters up to HEPA 13. The filters are produced in accorance with ISO 16890. A E11 filter is also optional according to EN1822 1:2009.

When fitted with the optional accessories the ecomax 30 can also be used as direct high-performance suction.

Datenblatt

-

Usage

ecomax 30

Modern filter technololgy for fresh air

The ecomax 30 is ligtweight and easy to operate. The filters can be changed quickly and efficiently.

Permanent automatic electronic control of ecomax 30

Speed protection
Motor current limit
Soft start
Operation and fault indication

Our specially made filters consist of synthetic non-woven fabrics which are 100% glass fibre free and microbiologically inert. This ensures that even in extreme cases the filtered air quality will be of an improved quality compared to the unfiltered air

The main Filter ISO ePM1 65% works to comply with the latest industry standards for air quality.

High quality filter materials according to ISO 16890

In its standard configuration, the ecomax 30 is delivered with a pre-filter and main-filter certified according to ISO 16890.

The filter consist of synthetic non-woven material, free from dyes, binding or solvent agent and are microbiologically inert due to their hydrophobic properties.

Mode of operation of the ecomax 30

The polluted air is sucked via the filter surface located on the top the ecomax 30 into the unit. This air is then filtered via the pre filter ISO Coarse 90% (G4) and the main filter ISO ePM1 65% (F8). The clean air is then redistributed via three air grills situated at the lower part of the unit.

The unit is fully electronically controlled, operating through the use of modern EC-Green DC fan technology with an efficiency of to 90%. As a result the unit runs economically and efficiently.

The ecomax 30 optimises air cleaning for most industrial branches up to 10,000m3

Application areas

production facilities
storage rooms
laboratories
tool manufacturing
food industry
assembly rooms
foyers
production line
process protection

Technical data

ecomax 30	(AP3001)

Input Supply Voltage	230V/ 50 / 60Hz
Power consumption	250W
Current usage	1,1A
Weight	42 kg
Dimensions LxWxH	66 x 68 x 125 cm
Noise level	65 db(A)
Casing material	Aluminium
Protection class	IP50
Number of filters	2
Filter classes according to ISO 16890	Pre filter ISO Coarse 90% (G4)
Filter classes according to ISO 16890	Main filter ISO ePM1 65% (F8)
Filter performance ISO ePM1 65%	3,500m3 /h
Filter performance E11	3,000m3 /h [optional]
Filter change (druckgesteuert)	LED red/ flashing
Operation-/error message	LED green/ without error
Ambient temperature (max.)	[–25 °C bis +60 °C]

Recommended retail prices from the plant	4620,- €

Specifications in accordance to ErP- guideline
EC radial fan	curved backwards
Rotation speed control	yes
Total efficiency N ηes /%	66,2 [Vorgabe 2015: 45,2]
Installation category	A
Efficiency category	Statisch
Effizienzklasse N	83 [Vorgabe 2015: 62]
Electronic fan control	Speed protection Soft start Motor current limit Over heating cut out

Data sheet

Pricelist*

*Recommended retail prices from the plant, **

ecomax 30	Article No.	Technical Information	Dimensions (l/w/h)	Data sheet	Price_*	Order
	AP3001	Filter performance: 3,500m³/h Noise level: 65 db(A) Performance: 250W	660mm 680mm 1250mm	45kg	4620,- €	amount

Equipment

Go back

View shopping basket (0)